Tube & Sheet
Order

Your sign, measured before it glows.

Type a name or bring your logo. You get the exact size, the real price and a true preview on the wall. Then we cut and build it in our own workshop.

Lettering
Colour
Width

The full designer adds your logo, extra lines, backing shapes and a photo of your own wall.

price today
$274
of LED tube
1.61 m
on one supply
16 W
to dispatch
10 days

Eighteen signs you can order as they are

Every picture is drawn by the software that drives our laser, so the size and the price are exact. Change the words, the colour or the size on any of them.

Bring your logo. See it as a sign in a minute.

Upload a PNG, JPG or SVG in the designer. It traces the artwork into tube runs, matches it to our twelve LED colours and prices it on the spot. Lay it over a photo of your own wall to check the size before you order.

LED neon on acrylic

Flexible 12 V LED tube glued to a clear, black or mirror backing cut to shape. The classic glowing sign, cool to the touch.

Cut acrylic lettering

Letters cut from coloured or mirror acrylic, with an optional shadow layer, fixed straight to the wall. No power needed.

Engraved plaque

A panel on standoffs with cut letters and fine engraved lines. For receptions, doors and office walls.

Edge-lit panel

Engraving on clear acrylic that lights up from an LED base. Stands on a desk or shelf and runs from USB.

The cutting drawing of the sign you designed above.

This is the drawing our laser gets

Nothing is redrawn by hand between your screen and the workshop. The outline, the tube paths and the mounting holes you see here are the file we cut.

  1. You design and order. We check the file and confirm the price and the date. A 50% deposit starts the job.
  2. We cut the acrylic. One piece up to 915 × 458 mm on our 80 W CO2 laser. Wider signs are made in sections.
  3. We fit the light. LED tube is glued along the scored guide lines, soldered and wired to one supply sized with 20% headroom.
  4. We switch it on, then pack it. Every sign is lit and checked before it goes in the box.

What comes in the box, and what you can add

Included in every price

  • The sign, on 5 mm cast acrylic
  • A 12 V power supply matched to your sign
  • Clear cable to the supply
  • Wall fixings: standoffs or hanging holes
  • A drawing with the size and hole positions

Extras, priced for your sign

    Two or more of the same sign cost 5% less each, five or more 10% less, ten or more 15% less.

    Questions people ask before ordering

    How long does it take?

    About 10 working days from your deposit to dispatch. If you have a fixed date, write it in the order and we tell you straight away whether we can meet it. A rush option moves you to the front of the queue.

    How big can a sign be?

    A single piece can be up to 915 × 458 mm, the cutting area of our laser. Larger signs are built in sections that mount side by side. The designer shows the real width and height in millimetres as you change the design.

    Can you make my logo exactly?

    Upload it in the designer and you see how it turns into tube runs. Very thin strokes and tiny details cannot be bent in LED tube, so the designer warns you and suggests a larger size, a thinner tube or engraving for those parts. We send a final drawing for approval before cutting.

    How much electricity does it use?

    Very little. LED neon draws about 10 W for each metre (3 W a foot) of tube, and the designer shows the figure for your sign. A typical name sign 50 cm wide uses less than 20 W.

    Is it safe? Does it get hot?

    The tube is silicone and LED, runs at 12 V and stays cool to the touch. There is no glass and no gas. The power supply plugs into a normal socket.

    Can it go outside?

    Choose the outdoor option. The tube and connectors are sealed against rain, and we advise on where to place the power supply. Standard signs are for indoor walls and windows.

    How do I hang it?

    Signs with a rectangular or round backing come with holes and standoff fixings. Signs cut to the outline of the lettering are hung with clear adhesive strips or with holes we add where you ask. A drawing with the hole positions is in the box.

    How do I pay?

    You send the order from this page and pay nothing yet. We confirm the price and date by email with a secure payment link for the 50% deposit. The balance is due before dispatch.

    What if it arrives damaged or stops working?

    Send us a photo and we repair or replace it. Signs are covered for 12 months against faults. Because each sign is made to order, we cannot take returns for a change of mind.

    Your order

      Nothing here yet. Design a sign at the top of the page or pick one from the range.

      No payment is taken on this page. We reply with a drawing, the confirmed price and a payment link.

      Design your sign